What To Do If Brother Printer Won’t Turn On Issue

With the multifunctional features, the Brother printers are one of the most popular ones all over the globe. With the help of this, you can easily print the documents, files, etc. Moreover, with its complete features but many users complain that their Brother printer won’t turn on and cannot be able to complete the work. Many reasons are there behind the occurrence of this issue. This issue appears if any connections and faulty power cords are uncommon, then it is a reasonable cause of the Brother printer is not switching on. If you are using the surge protector, then you may see this issue on your Brother printer.

Sometimes, it happens if the power button of the printer is damaged. So, you need to solve it immediately. Here, in this article, you can see all the troubleshooting process for this particular issue that you have faced.

Know the Troubleshooting Process of Brother Printer won’t Turn on Problem

Now, we are going to provide the easy and quick procedures so that you should apply on the system to solve the Brother printer won’t turn on the issue. Let’s take a look at the given below:

Procedure 1 – Check the Power Code

At first, you need to check whether the power code is properly connected or not. For the Brother printer, the power switch is a soft power switch that is connected to the printer’s electrical aspects. And it is not physically connected. Also, it does not turn off the power. Depending on the printer’s brand and model, the software can prevent the switch from working if it is pressed for too long or too short, or if there is an open door on the printer or access panel.

To turn on the printer, unplug all cables, then wait for at least forty seconds. After that, you can connect only the power cord. Then, you can check whether the issue has been resolved or not.

Procedure 2 – Check the Power Button is Damaged

After checking the power code, you need to check whether the power button is damaged or not. If it is damaged, then you might see face the Brother printer won’t turn on issue on your Brother printer. So, at first, you need to repair the Brother printer power button and then check whether the issue has been resolved or not.

Procedure 3 – Clean the Inside of the Printer

Look inside the printer. If there is ink leakage from the cartridge, it might cause a short circuit. So, you need to clean it properly. After cleaning the printer, check whether the issue is solved or not. After doing this, if the problem still persists, then you need to go to the next procedure.

Procedure 4 – Printers with Built-in AC Adapters

This is another procedure that you can use to fix the Brother printer won’t turn on issue. If the printer uses a cable that cannot be removed, the cable cannot be tested. If the cable can be removed, the end of the printer might be a simple C13 connector which is also used by monitors and computers. Use another cable to determine if the original source is damaged.

Procedure 5 – Using the USB Cable

At first, you need to connect the printer into a USB port. Then, if you see the computer does not detect the printer that means the power is not even getting to the circuity. So it may be the power supply is defective. So, you have to use another power supply and then check whether the problem is still there or not.

Procedure 6 – Using the Power Button

If the above-mentioned procedures do not fix the Brother printer won’t turn on problem, then you can try this procedure. Sometimes, this issue has been resolved when you press the power button at least ten to twelve seconds and then check to see the issue should be fixed.

We hope the above-mentioned procedures are sufficient to get rid of the Brother printer won’t turn on problem. You can easily use it on your Brother printer to get rid of this issue. However, if you face this issue ever then, you can contact the professional.