How To Fix Brother Printer HL 2240?

Brothers Printers is one of the best and hi-tech devices that are profound all over the world for its ultra-edging features. Moreover, it makes printing more comfortable and convenient for every work. However, the fact is, like other printers it also faces some technical glitches. It becomes quite harsh when you encounter technical glitches like Brother Printer HL 2240 Error Light.

No matter how it occurs, some practical solutions can relieve you from such errors.

Instant Guides To Resolve Brother Printer HL 2240 Error Light

Here are some promising steps that will help you to rid your printer of all bugs.

Reset Toner Cartridge

Most often it is seen that the Brother HL-2240 stops the resetting of the device after you put up a new cartridge. Basically, in such a case the error leaves up with the messages such as ‘Toner low’ or ‘Toner empty.’ However, to remove the printer issue, do a  manual reset and follow the proceedings below:

  • Firstly, turn off the printer and open the front cover. Again while turning on the printer again, ensure that you hold the ‘Go’ button.
  • Once the Toner, Drum and the Error LED’s are on, release the Go button. Once you leave the Go button all the LEDs will turn off.
  • Now, again press the ‘Go’ button twice. All the above LEDs should turn on. Close the front cover and find whether the error LED is flashing up.

Reset Drum

The printer page counts needs to be reset once you change a DR420/ DR2200 drum in the Brother HL-2240. However, resetting will turn off the drum warning light of the printer. For doing so, one can directly open the front cover. Now by pressing the Go button, you must wait until all the four LED’s turn on. Once the LED’s are on, close the front cover and release the GO button. If the process does not work up, then proceed with the next one

Change the Toner Cartridge

To change the Toner cartridge, firstly ensure that the machine is on. Slowly without applying any pressure open the front cover. Now from the machine, remove the drum unit and the toner cartridge.

Take the toner cartridge out of the drum unit by pushing down the green lock lever. Wait, until you hear the lock into the place while placing up the new toner cartridge firmly into the drum unit. Be very much careful while putting the toner cartridge otherwise it will separate the drum unit.

Gently slide the green tab from left to right and vice versa several times, clean up the corona wire inside the drum.

Print Test Page

For this process, ensure that you turn off the printer. While the printer is getting on, hold the Go button. Once you hold on the Go button, the Toner, Drum and the Error LED’s will light up and turn on. Again press the Go button, once more and you will find that the printer starts printing the test page.


Related Post: How to Fix Brother Printer Machine Error 6A?


Contact Us +1-844-828-5593 For Troubleshooting Brother Printer HL 2240 Error Light

Brother Printer Support

Are you still facing problems after trying out the above solutions? Well, if this is the case then wait and give us the opportunity to deal with the incident. Our team consists of experienced professionals who are well-versed in resolving these technical errors of printers. To get instant response from our experts regarding Brother Printer HL 2240 Error Light, you can call us at toll-free Brother Support. We are accessible 24 hours for assisting our clients. You can also opt for our email services by emailing us your issues regarding the Brother printer and we will respond to it as soon as possible.